Set up Instructions

The dot board is designed to power journeys you would typically make on a non-powered skateboard but with a whole new level of freedom.  dot boards provide the ability to power up hills and also control downhill speed.

dot boards. electric freedom.

Board Set Up Guide

1. Open the product packaging and remove the board
2. Locate the magnetic cable and plug into the board
3. Connect the magnetic cable to the adapter
4. Plug the adapter into the wall and charge the battery until all lights flash green
5. The board is now fully charged and ready to ride

Remote Set Up Guide 

1. Locate the remote control and the USB cable in the packaging
2. Connect the cable into any compatible USB adapter
3. Charge until all lights flash green
4. The remote is now fully charged and ready to connect
5. Turn on the remote by holding down the directional pad for 3 seconds
6. Pairing is automatic and will begin immediately
7. Once paired you board is now connected, and you are ready to ride

Prepare to ride

1. Turn on the remote by pushing down on the menu button
2. Turn on the skateboard by spinning a wheel
3. Hold the remote control in your hand 
4. Put on safety gear
5. Push the board with your foot as you would a non-powered skateboard
6. When wheels are turning slowly press the throttle on the remote control