Changing Wheel Types

 To change your wheels from 83mm to 120mm or vice versa

1. Remove the tyre retaining screws
2. Remove the Hub Cap
3. Remove the wheel
4. Before re-installing the wheel, ensure the motor and wheel are free from dirt or obstructions
5. Slide the wheel over the motor and ensure the drive pegs align with the notches in the end of the motor
6. Fit the Hub Cap
7. Install the Tyre Retaining Screws and tighten firmly
8. To change the front wheels
9. Remove the axle nut
10. Remove the wheel
11. To re-install the front wheel, slide the wheel onto the axle
12. Re-install the axle nut
13. Correctly torque on the axle nut to allow the wheel to spin freely